Hayward replacement lights are available in minimum cord lengths of 50 ft. Longer cord lengths are available in increments of 50 ft., but please note that a special order applies. Hayward’s multi-colored lens kits add an elegant touch to pool and spa lighting, to create a special effect or a special mood. Our U.L. approved junction boxes provide a convenient way to wire virtually any light installation.
- SP0600U DuraNiche – Concrete
- SP0607U DuraNiche – Vinyl/Fiberglass
- SP0555 Series (Stainless Steel) – Concrete
- SP0506/SP0507 Series (Stainless Steel) – Vinyl/Fiberglass
DuraLite Series light fixtures mount in the following fixture housings (niches) only: SP0600U DuraNiche – Concrete. SP0607U DuraNiche – Vinyl/Fiberglass. SP0555 Series (Stainless Steel) – Concrete. SP0506/SP0507 Series (Stainless Steel) – Vinyl/Fiberglass.
SP0555, SP0506/SP0507: Niches are no longer manufactured.
Models with suffix “L” are equipped with an Automatic Thermal Switch (ATS)
Special cable lengths are available for all 12 Volt replacement models above 50′ in 50′ increments.
Special cable lengths are available for all 120 Volt replacement models above 50′ in 50′ increments.
Hayward does not recommend the installation of these 12 Volt lights with cord lengths above 50′ (voltage available to the light is diminished to a level that significantly reduced light output). Hayward does not recommend the installation of 120 Volt lights with cable lengths above 150′. For 12 Volt lights requiring longer than 50′ cable or 120 Volt lights requiring longer than 150′ cable, Hayward recommends using our Juntion Box SP0680 for 3/4″ conduit or SP0681 for 1″ conduit, and a light with cable length needed from the lighting fixture to the Junction Box. 12 Volt lights with more than 100′ cable or 120 Volt lights with more than 150′ cable are not UL listed.
SP0572LN50, SP0573LN50, SP0503100: Lights are for replacement only and are not intended for new code installations.
SP0570N50: SP0570 replaces SP0560 model.
1 year limited warranty.